Viola Systems Arctic Bedienungsanleitung PDF herunterladen (Seite 2)

Arctic Product Family 2(4)

Quick Start Guide

Connecting Arctic to Ethernet network

There are two different ways to configure the network settings, serial port or web access. The

recommended method is using web access.

Method 1: Setting IP Address Using Web Browser (Recommended)

1. Connect the cross-over Ethernet cable between the Arctic and your computer.

2. Configure your computer to use the same IP address space than Arctic (laptop IP for example

10.10.10.11 with netmask 255.0.0.0). Check the connection to Arctic with ping utility.

3. Connect to the Arctic using your web browser. The default IP address of Arctic is 10.10.10.10

(netmask 255.0.0.0).

4. From the initial page click Start configurator and enter login information in the following

page. Username is root and by default no password is set (just leave the field empty).

5. Navigate to Network page and from there to Ethernet subpage.

6. Enter the IP address and other network settings of your choice and click Apply and

then Commit to store the settings.

7. Reboot the Arctic for the settings to take effect.

NOTE: You could check the current network status from the Network-->Summary subpage.

Viola Systems Ltd. Phone: +358 (0)201 226 226 Fax: +358 (0)201 226 220 www.violasystems.com support@violasystems.com

Figure 1: Arctic

Configurator screen, Ethernet settings

1 2 3 4

Keine Kommentare

Viola Systems Arctic Bedienungsanleitung Seite 2